Shop

  • 90-degree corners are used to create right angles in handrails. All 90-degree corner pieces are sold individually and include an aluminum insert pre-installed on each end. To create handrail corners that are more or less than 90 degrees, please see plastic knuckles.
  • All Rampit USA ramps are attached to platforms using aluminum adapters attached to the ramp’s stringers. These adapters are reversible and can be used for ramps that go up or down. Each adapter pack includes two sets of adapters and hardware:
    • (2) Aluminum Adapters
    • (2) Angle Brackets
    • (6) 1" x 5/16" Carriage Bolts
    • (6) 5/16" Washers
    • (6) 5/16" Hex Nuts
    • (2) 1/4" x 1/2" Self-Tapping Screws
  • Aluminum Butt Ramp

    $145.95$677.95
    Rampit USA Empower Series™ Aluminum Butt Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Butt Ramp includes two legs that allow the ramp to “butt up” to a raised surface or doorway without interfering with an inward or outward swinging door.
    • Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
    • Lightweight, high-strength aluminum components will never rust or corrode
    • Included legs allow the ramp to “butt up” to a raised surface or doorway
    • Will not interfere with inward or outward swinging doors
    • Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
    • Available with or without handrails
    Assembly Required: In order to drastically reduce the cost of shipping, this product is shipped unassembled and will require assembly prior to use. More about Rampit USA Empower Series™ Aluminum Butt Ramps
  • Aluminum Curb Ramp

    $205.95$683.95
    Rampit USA Empower Series™ Aluminum Curb Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Curb Ramp includes a built-in adapter that hangs off the end of the ramp, enabling the ramp to rest on a door threshold or raised surface. Please note: a Curb Ramp is generally not compatible with an outward swinging door. For ramps that are compatible with outward swinging doors, please see Rampit USA Empower Series™ Aluminum Butt Ramps.
    • Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
    • Lightweight, high-strength aluminum components will never rust or corrode
    • The included adapter allows the ramp to rest on a raised surface or doorway
    • Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
    • Available with or without handrails
    Assembly Required: In order to drastically reduce the cost of shipping, this product is shipped unassembled and will require assembly prior to use. More about Rampit USA Empower Series™ Aluminum Curb Ramps
  • Aluminum inserts are inserted into the open ends of handrail components to create a secure connection between various components.
  • Aluminum Pipe

    $6.01$60.72
    Aluminum pipe is sold by the foot and can be used for Rampit USA legs and leg assemblies (2"), or Rampit USA handrails (1 1/2"). The aluminum pipe does not include any additional inserts or hardware for installation.
  • ANSI loops are the rounded ends of Rampit USA handrails. ANSI loops include pre-installed aluminum inserts (not pictured) and can be flipped to angle upwards or downwards.
  • Bevel

    $45.80$161.04
    The self-adjusting bevel is installed at the start of every Rampit USA ramp and ensures a smooth transition on or off the ramp.
  • Built in Adapter (BIAD)

    $64.81$123.02
    The built-in adapter is an optional replacement for the uppermost piece of tread in a ramp section. The built-in adapter extends out beyond the end of the ramp, enabling the ramp to rest on the raised surface. Please select the length built-in adapter that best corresponds to the width of your ramp.
  • Crossarm

    $90.79$96.73
    Crossarms are available in two different widths and include two crossarm clamps and two leg clamps. Crossarms do not include legs. For a complete assembly including legs, please see support assembly.
  • The crossarm clamp is part of a ramp's support assembly and is responsible for holding the crossarm in place on the leg. Crossarm clamps are sold individually and include all necessary hardware.

Title

Go to Top