- Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
- Lightweight, high-strength aluminum components will never rust or corrode
- Included legs allow the ramp to “butt up” to a raised surface or doorway
- Will not interfere with inward or outward swinging doors
- Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
- Available with or without handrails
-
Rampit USA Empower Series™ Aluminum Butt Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Butt Ramp includes two legs that allow the ramp to “butt up” to a raised surface or doorway without interfering with an inward or outward swinging door. -
Rampit USA Empower Series™ Aluminum Curb Ramps are made of lightweight, high-strength aluminum components that will never rust or corrode and are built to withstand a lifetime of everyday use. The upper end of a Curb Ramp includes a built-in adapter that hangs off the end of the ramp, enabling the ramp to rest on a door threshold or raised surface. Please note: a Curb Ramp is generally not compatible with an outward swinging door. For ramps that are compatible with outward swinging doors, please see Rampit USA Empower Series™ Aluminum Butt Ramps.- Heavy Duty ramps can hold extreme weights of up to 1,000 lbs
- Lightweight, high-strength aluminum components will never rust or corrode
- The included adapter allows the ramp to rest on a raised surface or doorway
- Self-adjusting bevel creates a safe, smooth transition onto and off the ramp
- Available with or without handrails
-
Rampit USA rubber threshold ramps provide safe and easy access to areas with a rise of up to two inches and can withstand weights up to 1,000 lbs.- 100% recycled rubber can withstand a lifetime of indoor and outdoor use.
- Easy to clean, anti-slip surface for safety and convenience.
- Comes with a hassle-free, lifetime manufacturer's warranty.
- All Rampit USA Rubber Threshold Ramps are ADA Compliant and Made in America.
-
Legs are sold individually and include a 2" aluminum tube, footpad, and post cap. Rampit USA recommends purchasing legs longer than the needed application to allow for adjustments. We also recommend a diagonal brace for legs exceeding 48" in height. -
Platform handrails are priced and sold individually and do not include ninety-degree corners or plastic knuckles for connecting multiple handrails. -
Ramp handrails are sold as a set and only include hardware for installation. Square ends, ANSI Loops, Knuckles, Corners, Caps, and inserts needed for terminating or changing handrail direction are all sold separately. -
A support assembly is made up of a crossarm, including two leg clamps and two crossarm clamps, and two complete legs. Support assemblies are installed underneath a ramp and are used to connect two individual ramp sections. -
All Rampit USA aluminum ramps and platforms are assembled using a series of inter-connected pieces of light, and/or heavy tread. All tread pieces are six inches in length and can be cut to any width necessary. Light tread is standard on all residential platforms and portable ramps. -
Stringers are shaped like an upside-down letter "F" and enclose all Rampit USA ramps and platforms. On platforms, two of the four stringers are usually flipped upside-down to create a smooth transition on and off the platform. Platform stringers are cut at 45-degree angles, whereas ramp stringers are cut at 90-degree angles. Stringers are sold individually and cut to the length specified. For a matching set, please add two of the same size to your cart. -
All Rampit USA aluminum ramps and platforms are assembled using a series of inter-connected pieces of light, and/or heavy tread. All tread pieces are six inches in length and can be cut to any width necessary. Medium tread is used in all ramps and commercial platforms. There are two different types of medium tread in all Rampit USA ramp sections. The first piece of tread is open on the front and the back, and is known as starter tread. This enables ramp sections to be connected to one another. All remaining tread on a ramp section is standard medium tread, and is open on the front, but closed on the back. -
All Rampit USA ramps are attached to platforms using aluminum adapters attached to the ramp’s stringers. These adapters are reversible and can be used for ramps that go up or down. Each adapter pack includes two sets of adapters and hardware:- (2) Aluminum Adapters
- (2) Angle Brackets
- (6) 1" x 5/16" Carriage Bolts
- (6) 5/16" Washers
- (6) 5/16" Hex Nuts
- (2) 1/4" x 1/2" Self-Tapping Screws
-
Large bolt packs contain enough hardware for installing six handrail posts:- (12) 1" x 5/16" Carriage Bolts
- (6) 2" x 5/16" Carriage Bolts
- (18) 5/16" Washers
- (18) 5/16" Hex Nuts